Asphalt planer CP
Asphalt planer are designed to carry out road maintenance work, to remove a layer of asphalt to replace it or to carry out subsequent excavations. They also make it possible to reuse the removed material for the subsequent filling of the excavation or for the restoration of the road surface itself.
Thanks to the two sturdy steel wheels on the frame, and the two front rocking pads in Hardox, the tiller has four points of contact with the ground; this allows the operator to work with the machine arm positioned totally at the bottom, allowing great visibility; it also gives great strength and efficiency to the asphalt planer itself during the work phases, and an absence of vibrations, even in the long term.
All movements can be hydraulic: the translation to be able to carry out excavations even flush with the wall; the independent right and left depth adjustment allows you to perform side-by-side passes; the tilt (except for the CP 40.13 model) in order to keep the excavation depth constant even in the face of irregularities or inclinations of the road surface.
The drum is composed of sturdy asphalt spikes (on request it is possible to supply spikes for concrete or rock as an alternative).
On request, it is possible to have the water pressure kit with sprayers to reduce dust.
Asphalt planer CP
Asphalt planer are designed to carry out road maintenance work, to remove a layer of asphalt to replace it or to carry out subsequent excavations. They also make it possible to reuse the removed material for the subsequent filling of the excavation or for the restoration of the road surface itself.
Thanks to the two sturdy steel wheels on the frame, and the two front rocking pads in Hardox, the tiller has four points of contact with the ground; this allows the operator to work with the machine arm positioned totally at the bottom, allowing great visibility; it also gives great strength and efficiency to the asphalt planer itself during the work phases, and an absence of vibrations, even in the long term.
All movements can be hydraulic: the translation to be able to carry out excavations even flush with the wall; the independent right and left depth adjustment allows you to perform side-by-side passes; the tilt (except for the CP 40.13 model) in order to keep the excavation depth constant even in the face of irregularities or inclinations of the road surface.
The drum is composed of sturdy asphalt spikes (on request it is possible to supply spikes for concrete or rock as an alternative).
On request, it is possible to have the water pressure kit with sprayers to reduce dust.
Video
Steel wheels on the frame for greater stability and stiffness:
The two sturdy steel wheels placed on the frame allow the frame to have two points of support on the ground, in addition to the two rocking feet in Hardox placed at the front of the tiller, ensure that the tiller can always advance with 4 contact points on the ground, ensuring great stability and rigidity especially over time.
Maximum visibility for the operator thanks to the low position of the shovel arm:
The construction concept of the CP GF Gordini road asphalt planer allows the operator to keep the arm of the mini shovel always low; in this way the vibrations are reduced to a minimum and there is a great visibility during the milling.
Maximum visibility for the operator thanks to the low position of the shovel arm:
The construction concept of the CP GF Gordini road asphalt planer allows the operator to keep the arm of the mini shovel always low; in this way the vibrations are reduced to a minimum and there is a great visibility during the milling.
Depth adjustment with independent right and left support skids:
The depth adjustment is independent left and right in order to perform side-by-side passes with high precision. In the standard configuration, the depth is adjusted manually by means of endless screws; on request it is possible to have the hydraulic depth adjustment.
Photo gallery
Share products
