Swinging planer CPB
The swinging planers are designed to carry out road maintenance work, to remove a layer of asphalt to replace it or to carry out subsequent excavations. They also make it possible to reuse the removed material for the subsequent filling of the excavation or for the restoration of the road surface itself.
The swinging planers can work on horizontal, vertical and inclined surfaces, applied to an excavator or to the rear arm of a backhoe loader.
The swinging arm is free to absorb, without the excavation and its depth suffering, all the movements of the excavator arm or the back of the backhoe.
Depth adjustment is done manually by means of a telescopic screw which acts on the two sturdy slides. On request it is possible to have the hydraulic depth adjustment, which will need to be connected to an additional double-acting hydraulic line.
The drum is composed of sturdy asphalt spikes (on request it is possible to supply spikes for concrete or rock as an alternative).
Swinging planer CPB
The swinging planers are designed to carry out road maintenance work, to remove a layer of asphalt to replace it or to carry out subsequent excavations. They also make it possible to reuse the removed material for the subsequent filling of the excavation or for the restoration of the road surface itself.
The swinging planers can work on horizontal, vertical and inclined surfaces, applied to an excavator or to the rear arm of a backhoe loader.
The swinging arm is free to absorb, without the excavation and its depth suffering, all the movements of the excavator arm or the back of the backhoe.
Depth adjustment is done manually by means of a telescopic screw which acts on the two sturdy slides. On request it is possible to have the hydraulic depth adjustment, which will need to be connected to an additional double-acting hydraulic line.
The drum is composed of sturdy asphalt spikes (on request it is possible to supply spikes for concrete or rock as an alternative).
Video
Oscillating arm support to be able to mill horizontally, vertically or at an angle:
Sturdy swing arm with bronze bushing to ensure its integrity and avoid wear over time. Bolted and interchangeable attachment saddle for greater flexibility and versatility of the tilting milling machine on different types of machines.
Constant milling depth; depth adjustment with telescopic screw (on request: hydraulic adjustment):
In the standard configuration, the depth is adjusted manually by means of endless screws; on request it is possible to have the hydraulic depth adjustment. In this case, however, an additional double-acting hydraulic line is required.
Constant milling depth; depth adjustment with telescopic screw (on request: hydraulic adjustment):
In the standard configuration, the depth is adjusted manually by means of endless screws; on request it is possible to have the hydraulic depth adjustment. In this case, however, an additional double-acting hydraulic line is required.
Wide range of products for applications on different machines:
Range that covers many sizes of backhoe loaders (where the tilting tiller must be mounted in the rear arm) and excavators from 3.0 ton to 18.0 ton.
Photo gallery
Share products
