Mulcher MTC/TC
The mulcher is particularly suitable for shredding small grass or shrubs, it is generally used for the maintenance of public green areas and for cleaning the undergrowth.
The sturdy composition of the body makes it particularly suitable for carrying out heavy work and, combined with the quality of the hydraulic components used, ensures its operation and excellent durability over time.
In the TC models there is a mechanical translation to the right of 40cm, to carry out mowing work flush with the wall; on request it is possible to have hydraulic translation.
The MTC models, on the other hand, consist of a fixed frame.
All models are equipped with a hydraulic valve unit that can protect the hydraulic motor of the front shredder in the face of pressure peaks that can occur during work. In addition, all models require 3 hydraulic lines (delivery, return and drainage), for further protection and to avoid any type of problem in the hydraulic system.
The rotor, for MTC models, can be made up of knives (mainly for cutting grass) or mallets (for cutting flower beds or small shrubs); in the TC models, on the other hand, the rotor is made with mallets to be able to cut grass or shrubs.
The TC models are equipped, in the standard version, with a floating system on the frame that allows the shredder to always remain adherent to the surface and allow excellent cutting precision.
All models are equipped with a height-adjustable support roller to ensure stability to the shredder, in addition to the two sturdy, replaceable side skids made of wear-resistant steel.
Mulcher MTC/TC
The mulcher is particularly suitable for shredding small grass or shrubs, it is generally used for the maintenance of public green areas and for cleaning the undergrowth.
The sturdy composition of the body makes it particularly suitable for carrying out heavy work and, combined with the quality of the hydraulic components used, ensures its operation and excellent durability over time.
In the TC models there is a mechanical translation to the right of 40cm, to carry out mowing work flush with the wall; on request it is possible to have hydraulic translation.
The MTC models, on the other hand, consist of a fixed frame.
All models are equipped with a hydraulic valve unit that can protect the hydraulic motor of the front shredder in the face of pressure peaks that can occur during work. In addition, all models require 3 hydraulic lines (delivery, return and drainage), for further protection and to avoid any type of problem in the hydraulic system.
The rotor, for MTC models, can be made up of knives (mainly for cutting grass) or mallets (for cutting flower beds or small shrubs); in the TC models, on the other hand, the rotor is made with mallets to be able to cut grass or shrubs.
The TC models are equipped, in the standard version, with a floating system on the frame that allows the shredder to always remain adherent to the surface and allow excellent cutting precision.
All models are equipped with a height-adjustable support roller to ensure stability to the shredder, in addition to the two sturdy, replaceable side skids made of wear-resistant steel.
Video
Integrated valve group to protect the hydraulic motor from pressure peaks. 3 hydraulic lines required in all models:
In all front shredder models there is a hydraulic valve integrated into the motor so that the motor can be protected from pressure peaks that otherwise would inevitably damage its seals. All models are equipped with 3 hydraulic lines (delivery + return + drainage).
Frame with floating system for TC models:
TC models are equipped with a floating system in the frame as standard. This allows the front shredder to always follow the working bed, even if it has irregularities; ensuring greater precision in cutting grass, shrubs or other.
Frame with floating system for TC models:
TC models are equipped with a floating system in the frame as standard. This allows the front shredder to always follow the working bed, even if it has irregularities; ensuring greater precision in cutting grass, shrubs or other.
Right mechanical translation for working flush with the wall by means of worm screw for TC models (hydraulic translation on request):
The TC models are equipped, as standard, with mechanical translation (by means of an endless screw) on the right side. This allows you to work flush with the wall and therefore to reach otherwise unreachable points. On request it is possible to have the hydraulic translation.
Photo gallery
Share products
