Sweeper with collection bucket SX
The sweeper with collection bucket is used to clean the road surface, industrial or any type of surface.
Thanks to its great strength and resistance, it is often used by companies responsible for road maintenance.
It is equipped with a high capacity collection bucket, the largest on the market in its category. This represents a great advantage in terms of saving time.
The brush roller is composed, in the standard version, of zig-zag rings in polypropylene with a steel core, with a diameter of Ø600mm; on request it is possible to make the brush roller composed of 50% polypropylene rings and 50% steel rings, alternating, for more demanding jobs or the presence of wet asphalt, encrusted material, etc.
The brush roller is adjustable in height to allow the rings to be used up to the last centimeter and, consequently, have lower maintenance costs.
The bolted and reversible cutting edge allows it to be reused once one side is worn.
The hydraulic engine is integrated inside the body of the sweeper, this allows for minimum lateral bulk and therefore allows working flush with the wall.
Gravity or pressure watering kits are available on request, with a 100-liter tank and sprayers; furthermore, the addition of a right and/or left side brush is available to collect material also laterally, thus increasing the sweeping capacity.
Spazzatrice SPR
The sweeper with collection bucket is used to clean the road surface, industrial or any type of surface.
Thanks to its great strength and resistance, it is often used by companies responsible for road maintenance.
It is equipped with a high capacity collection bucket, the largest on the market in its category. This represents a great advantage in terms of saving time.
The brush roller is composed, in the standard version, of zig-zag rings in polypropylene with a steel core, with a diameter of Ø600mm; on request it is possible to make the brush roller composed of 50% polypropylene rings and 50% steel rings, alternating, for more demanding jobs or the presence of wet asphalt, encrusted material, etc.
The brush roller is adjustable in height to allow the rings to be used up to the last centimeter and, consequently, have lower maintenance costs.
The bolted and reversible cutting edge allows it to be reused once one side is worn.
The hydraulic engine is integrated inside the body of the sweeper, this allows for minimum lateral bulk and therefore allows working flush with the wall.
Gravity or pressure watering kits are available on request, with a 100-liter tank and sprayers; furthermore, the addition of a right and/or left side brush is available to collect material also laterally, thus increasing the sweeping capacity.
Bolt-on and reversible cutting edge:
Bolt-on and reversible wear-resistant steel cutting edge. The cutting edge is chamfered on both sides and for a longer life of the same, it can be reversed and used in the second side, once fully consumed the first.
Direct motor and integrated in the shaft:
Direct motor drive, integrated in the brush shaft, with well-protected pipes passage, all inside the collecting bucket. This ensures a greater compactness, better visibility and possibility to carry out works on the wall.
The robust hydraulic motor used guarantees resistance to shocks and stresses.
Direct motor and integrated in the shaft:
Direct motor drive, integrated in the brush shaft, with well-protected pipes passage, all inside the collecting bucket. This ensures a greater compactness, better visibility and possibility to carry out works on the wall.
The robust hydraulic motor used guarantees resistance to shocks and stresses.
Bolted attachment:
For better versatility the attachment is bolted. You can then change the attachment plate at any time to adapt the sweeper to any type of machine.
Photo gallery
Share products
